Icon-below-ground-tn
Icon-above-ground-tn
Icon-flooring-tn
Icon-pumps-drainage-tn

Basement Development London

Little Boltons

Pre formed sump chamber and channels formed for sump and pump pipe work Newton titan chamber installed
Basement waterproofing
sump and channels.

A basement development by London based design and build basement specialist company Basement Force - utilising John Newton & Co's Basement Waterproofing Products.

Originally a five story house in West London, the developers

Earth removal from basement to street level
Earth being removed by
conveyor during excavation
of the basement.

discovered a bricked up space below the ground floor and it was decided to excavate and create a basement level to increase the floor area by an extra 100 sqm.

Rubble and earth were removed from five rooms below the ground floor and it was underpinned to secure the foundations. Newton System 500 was used as the waterproofing solution. All five rooms have had Newton Basedrain installed at the wall/floor junction to intercept any water ingressing at this weak point in a structure and draining round the perimeter of the structure to a Newton Titan pump system with two pumps installed. Insulation was applied to the floor and Newton 508 placed above it as a waterproof barrier bringing the whole to be level with the top of the Newton Basedrain to accept a minimum 50mm screed. Jetting eyes have also been installed to create a maintainable system that complies with BS8102.

An independent frame will be applied to the walls to accept insulated dry-lining, plaster skim and decoration. The use of insulated dry-lining is now common practice to comply with recent changes to building regulations regarding improvements to the thermal properties of habitable dwellings. However, this increases the risk of interstitial condensation forming should the temperature of the internal face of the membrane fall below the dew point. The use of our specially designed Newton Basedrain prevents any potential interstitial condensation from causing a problem.

 Basement Dig out in processUnderpinning complete ready for Newton 500 installation
Basement being excaved and extended
down to provide 100sqm of further space.

Basement dug out ready for Newton

System 500 Basement waterproofing.

 

This project in The Little Boltons in South West London was created by the London basement development company Basement Force who have an extensive knowledge of the London basement market. There will be fresh photographs as the project progresses.

Newton 500 applied to walls
Newton 500 Waterproofing Membrane
being applied to walls.

 

Please Contact Our Office for details of the Newton products used and Newton Registered contractors in your area. 

Icon-trade-bba Bswa Cpdam Cpdred Nbs_plus_stamp Rps_369 Pcaban Cpdol_485