Newton Waterproofing Solutions
Newton System 500 Product Range
Newton System 500 is a waterproofing system based upon our range of cavity drain membranes, drainage systems
and pumping systems. Unlike conventional ‘tanking’, Newton System 500 is not attempting the almost impossible and trying to hold water back, but places designed maintainable depressurisation voids at known weaknesses in the structure so that ingressing water is simply captured and diverted out of the property.
At the core of Newton System 500 is our range of high grade specialist membranes for walls, floor and vaulted ceilings. Designed to accommodate a comprehensive range of wall and floor finishes, simply choose the membrane appropriate for the look and feel demanded by your project.
Newton membranes are the highest quality available in the UK because unlike our competitors, we are not dictated to by one manufacturer and so our independence allows us to demand the specification and quality of the product from a range of suppliers throughout Europe. Newton 508, for example, at 0.6mm thickness, is the strongest and appreciably the highest quality of all the 8mm membranes available.
“Newton System 500 is regarded as the premium drained cavity waterproofing system available and the preferred choice for professional specifiers and professional waterproofing contractors alike.”
Product Overview Newton System 500 Wall Membranes
Newton System 500 Flooring Membranes
John Newton & Company supply a full range of flooring membranes for both damp-proofing and waterproofing. All our
flooring membranes can be used as a stand-alone product for dealing with a specific problem, or they can be used as part of a well designed Newton System 500 waterproofing scheme.
All of our flooring membranes can be used as part of a well designed below ground waterproofing system. Above ground, two options are available when faced with a damp floor: replace the floor, or fully isolate the dampness from the flooring. If the slab is in poor condition it is often decided to replace the slab and to include a DPM below this. However, in many listed properties the floor cannot be removed for conservation reasons, and so a membrane must be laid above to protect the new floor finish from the dampness within the slab. Often where a new slab has been laid, commercial time constraints dictate that the floor finish be laid before the new slab is fully dry. Our flooring membranes can be laid as soon as the the ’green’ slab can take pedestrian traffic (often the next day), allowing for even moisture sensitive flooring to be laid almost immediately.
Product Overview Newton System 500 Flooring Membranes
Newton Damp Proofing Solutions
Rising and penetrating damp, and discolouration caused by oils, salts, acids etc. are problems encountered in many
buildings. Wind driven rain can enter exposed properties leading to dampness internally. Even slight damp penetration will cause discolouration to surface plaster, decorations and potentially this can even affect the buildings structural integrity. Dampness in habitable or storage areas is unacceptable and a permanent solution must be found.
Newlath 2000 and Newtonite damp-proofing membranes provide a firm key and impermeable barrier on any damp or deteriorating surface where direct bonding is not possible. Even poor and random substrates can easily receive these cavity drain membranes when using the COB PLUG that expands to gain a strong fixing.
Product Overview Newton Damp Proofing Solutions
Newton Pumping
John Newton & Company’s pumping range has been developed to provide a broad range of pumping soluti
ons which together with our extensive list of ancillary products ensure that the Newton System 500 waterproofing system sets new standards of performance and reliability.
Our sump and pump combinations for basement waterproofing offer the specifier and end client a full range of pumping products. Whether you need to control clear ground water, grey water, effluent or sewerage, John Newton supply a complete range of the highest specification pumps available for all of your pumping requirements.
The Titan-Pro and Titan range of sump systems are applicable for use in domestic and commercial basements as well as civil applications.
A range of control panels, power failure protection systems and pump monitoring systems compliment the Newton sump and pump systems.
Product Overview Newton Pumping Products
